Tuesday, 25 February 2014

Ag Shield's Road Side Sprayer: Cost-effective vegetation management solution


Effective Vegetation Management For Lower Cost



What the road side sprayer can do for you...

  • Effectively manage vegetation on road top, slope and ditch in one pass. 
  • Significantly reduce over all application, equipment and labor costs.
  • Reduce risk and liability 

 

Match our road side sprayer variations to your equipment and application requirements.



Key Product Features


Contained Skid Mounts
· Designed for easy  mounting and
  removal.
· Built for 1/2 , 3/4 or 1 tonne truck beds and  flat decks.
Plumbing Manifolds and Tanks
· Customized tank,  plumbing,  pump and
  nozzle variations  that offer single, double          
  or triple applications.
Shielded Spray Booms
· Spray booms sections that allow you to
  effectively target unwanted vegetation
· Spray road tops, slopes and ditches in one pass.
. Control spray drift.
· Reduce risk and liability.
Quality  Components
· In cab boom control and  automatic rate
  controllers offer convenience and keep
  rates matched to speeds.


Order Your Road Side Sprayer Today!

1-800-561-0132









Thursday, 2 January 2014

Ag Shield's 2014 Winter Agricultural Trade Show Schedule

Our winter agriculture trade show season is just ahead of us and we will be traveling throughout Canada and the US. We again, look forward to showcasing our diverse product line at a multitude of show locations and visiting with our many global customers and partners.

 Please be sure to visit us at the following show locations listed below.

We look forward to seeing you!
 
 
Crop Production Show                     
www.cropproductiononline.com

 Saskatoon, SK            January 13 to 16, 2014
 
 
Ag Days Show                     

Brandon, MB               January 21 to 23, 2014
 
 
KMOT Ag Expo         

 Minot, ND                  January 29 to 31, 2014
 
 
National Farm Machinery Show                   
www.farmmachineryshow.org

Louisville, KY            February 12 to 15, 2014
 
 
World Ag Expo
www.worldagexpo.com

Tulare, CA                 February 11 to 13, 2014
 
 

Tuesday, 3 December 2013

Ag Shield's Shielded Sprayer Booms: A Necessity for Kansas Sprayer Operators


 
If you could purchase a sprayer boom that would cover the gamut of assurances for operational efficiency, durability, longevity, value and a positive return on your investment, where might you go to seek such a product?

For at least one sprayer operator, Ag Shield's shielded sprayer boom has satisfied the niche of such requirements.

Meet Larry Molyneux,  a veteran sprayer operator of fifty years. Larry uses a shielded sprayer boom from Ag Shield matched to an Apache high clearance chassis. A few clips of Larry's story can be viewed below.



 

 The full version can be viewed on You Tube at http://www.youtube.com/watch?v=edDaAtcvCeg

The interview was done by Arden Koehn from Price Brothers Equipment Company; the Apache high clearance chassis is a product from Simpson Farm Enterprises Inc., both industry partners are from Kansas, USA.

Thursday, 21 November 2013

Kansas Farmer "Gets The Job Done" With Ag Shield Sprayer Booms

Call it a perfect match or plainly just creating an opportunity, what ever the case, Ag Shield Manufacturing has enjoyed meeting the needs of customers from far and wide.

Whether its increasing crop and forage yields, pasture and land management or simply matching the right niche product to the appropriate application, Ag Shield innovation has risen to the occasion.

When it comes to an industry leading, patented sprayer boom application system,  Ag Shield has met the needs of many and in more ways than one.

With every product that is delivered there is a need that has been met and a success story to be told.
This story takes us to the "Wheat State" of Kansas, USA.

Eric Jacques has been using  Ag Shield's 100ft shielded sprayer booms with GFS (ground following system) for the past three years. After exposing his first set to over 50,000 acres with out a hitch, he now has matched his second set to a John Deere 4830 high clearance chassis.

Jacques farms  wheat, corn, soybeans and grain sorghum. A diverse operation amongst a landscape that does offer up it's challenges to every day farming operations.











"In Kansas the wind is blowing every day, Ag Shield's shielded booms allow me to adapt to present weather conditions and spray when I need to spray." Jacques said,  "I just can't apply consistently without a covered boom."

Big winds, rough and rolling terrain makes a proven sprayer boom the key to sustained productivity.
       
Jacques stated, "When spraying glyphosate, I can operate in a twenty to thirty mile per hour winds and cover one in a half times more acres with the shielded boom."

"The in-cab GFS (ground following system) is easy to use, all I have to do is turn the dial. It allows me to keep my booms where I need them to be and my booms will simply last longer." Jacques said.

This relationship, like others are long and broad,  Ag Shield sprayer booms have been teamed with a variety of high clearance products, operators and used for a wide scale of applications.

 Ag Shield's foundation for long-term success in the sprayer boom market has been built in parallel with an innovative and quality product but also strong personal and working relationships.

Industry partners like Prairieland Partners in Hutchison and Price Brothers Equipment Company in Wichita
contribute greatly to making opportunities like these attainable.


Friday, 15 November 2013

New Additions to the Ag Shield Production Team: Increasing Efficiency, Quality and Customer Satisfaction

Increasing Efficiency, Quality and Customer Satisfaction

Throughout our various day to day production schedules and projects, Ag Shield staff and management continuously strive towards improvements to ensure of continued process efficiency, product quality and customer satisfaction.

Each year we review and recommend new investments into our production and assembly process. 2013 is no exception and we have now received two new additions to our production team. People.... no, but assets all the same.

The Wheelabrator Pass-Through Table Blast















This rugged and effective machine allows us to efficiently clean steel lengths and individual parts by throwing steel shot onto the material at high velocities removing surface rust, mill scale, welding smoke and splatter. What this process ensures of is;

  • Premium and hardened finish to steel for paint adhesion
  • Decreased prep time and required labor
  • Increased prep quality and paint ready parts
  • Decreased surface deficiencies
  • Increased quality of finished/painted parts
















The HyPerformance HPR130 Plasma Table

Just arriving, this new addition has replaced a previous, older plasma unit and has come with various upgrades;

  • Upgraded operational technology and machine software.
  • Able to cut oxy acetylene and plasma.
  • Ability to cut up to 1 1/2 " thick steel
  • Ability to accurate parts more efficiently
  • Straight air for shielding rather than nitrogen, reducing operational costs